ATCA Blades
SANBlaze has a complete line of AdvancedTCA blades providing building blocks for ATCA system designers. ATCA blades include compute, storage and switching solutions.
Storage Blades
ATCA® 10Gb RAID Storage Blade
SB- ATCA2000
- iSCSI, NFS, CFS/Samba, FCoE
- RAID 0,1,10,5,6
- 8 compact or 4 full height disk slots
- Redundant 10Gb fabric, 1Gb BASE
- Gen-2 SAS, Gen-2 PCIe
- Intel, Nehalem CPU
- Cache Cade
- VMware Ready® Certified
Click to Enlarge
ATCA® 6Gb SAS/SATA JBOD Blade
SB- ATCA2020
- AdvancedTCA Carrier Board
- 6.0 TB storage Capacity
- 8 Compact Height SATA/SSD disk slots
- 4 Full height SAS disk slots
- Optional RTM for disk capacity expansion
- JBOD (just a bunch of disks)
Click to Enlarge
ATCA® 10Gb RAID Storage Blade
SB-ATCA1000
- iSCSI, NFS, CFS
- RAID 0,1,1E
- 4 mid height AMC slots
- Redundant 10Gb fabric, 1Gb BASE
- Gen-1 SAS, Gen-1 PCIe
- Freescale, PowerPC CPU
- VMware Ready® Certified
Click to Enlarge
ATCA® 3Gb SAS/SATA JBOD Blade
SB-ATCA1020
- AdvancedTCA carrier board
- JBOD (just a bunch of disks)
- Use SAS, SATA or SSD disks
- 4 mid height AMC slots
- Zone-3 Advanced RTM (x4 SAS)
Click to Enlarge
Processor Blades
ATCA® Intel® Server Blade
SB-ATCA7300
- Dual 10GbE Fabric PICMG 3.1 Option 1,9
- Two 6-core Intel® XEON® CPU
- Up to 192GB main memory
- Rich Multifunction ARTM selection
- SANBlaze storage blade compliant
- VMware Ready Certified
Click to Enlarge
Switch and Carrier Blades
ATCA® PCI-Express Carrier Blade
SB-ATCA1010
- AdvancedTCA carrier board
- 48 lane PCI-express bridge
- 4 mid height AMC slots
- Zone-3 Advanced RTM (x8 PCIe)
Click to Enlarge
ATCA® Base Switch and Fabric breakout board
SB-ATS1927
- PICMG 3.1 Option 9 10G Fabric Ethernet Breakout
- 12 ports
- 10GBase-BX4 to SFP+
- 1G Base Ethernet Switch
- 24 1GbE & 3 10GbE ports
- Wire-speed performance
- Layer 2 switching
- Layer 3 routing
- L2 & L3 Multicast support
- Fully managed solution with SNMP, serial, web interface, telnet, and SSH
Click to Enlarge
ATCA® 10G Switch Blade
SB-ATS1936
- ATCA PICMG 3.0/3.1 Switch
- PICMG 3.0 R2.0 ECN002 compliant
- Base PICMG 3.0 Ethernet interface:
- • 24 1GbE and 3 10GbE ports
- Fabric 3.1 PICMG 3.1 Option 1 and Option 9
- Ethernet interface:
- 3 mid-size AMC sites
- Separate control processors for Base and Fabric
- Fully managed solution with SNMP, serial, web interface, telnet, and SSH
- Full 16 slot shelf supported
- Various uplink options via front panel and RTM
- Dual redundant shelf management controller support (Cross Connect)
Click to Enlarge
Printer-friendly version
Send by email