AdvancedTCA Blades And AdvancedTCA RTM
SANBlaze has developed several carrier boards for AdvancedTCA environments, each emphasizing different storage strategies to meet different architecture approaches. The realm of options range from JBOD to RAID, iSCSI to Fibre Channel, NAS to block I/O.
SANBlaze is also developing a set of Rear Transition Modules (RTM) that provide external I/O accessibility and expansion. Though primarily conceived to support SANBlaze ATCA storage carriers, these RTMs may be used with any ATCA blade that adheres to the RTM zone-3 connector standard (3-row). Customization services are available to accommodate other zone-3 pin-outs.
All AdvancedTCA carriers interoperate with the existing offering of SANBlaze AMC modules.
|
10Gb RAID Storage Services Blade |
|
PCI-Express Switch Blade, 4 AMC Slots |
|
SAS JBOD Blade, 4 AMC Slots |
|
|
|
ARTM 10Gb Ethernet Expansion Module |
|
SAS Expander, integrated disk drive (option) |
|
PRELIMINARY-SAS Expander, integrated disk drive (option) |
|
RTM PCIe and SAS I/O Pass-through
|
|
|
AdvancedTCA Carrier Blades
ATCA 10Gb RAID Storage Service Blade
SB-ATCA1000
Data sheet
| 
Architectures
• AdvancedTCA carrier board
• iSCSI, NFS, CFS
• RAID 0,1,1E
• 4 mid height AMC slots
• Redundant 10Gb fabric, 1Gb BAS
Download ATCA1000 use case examples
ATCA PCI Express Blade, 4 AMC Slots
SB-ATCA1010
Data sheet
| Manual
• AdvancedTCA carrier board
• 48 lane PCI-express bridge
• 4 mid height AMC slots
• Zone-3 Advanced RTM (x8 PCIe)
ATCA SAS JBOD Blade, 4 AMC Slots
SB-ATCA1020
Data sheet
| Manual
• AdvancedTCA carrier board
• JBOD (just a bunch of disks)
• Use SAS, SATA or SSD disks
• 4 mid height AMC slots
• Zone-3 Advanced RTM (x4 SAS)
Top
Rear Transition Modules (RTM)
ARTM 10Gb Ethernet Expansion Module
SB-ARTM400
Data sheet
| Plug and Play RTMs
• ATCA Rear Transition Module
• Four 10Gb SFP+
• Two 1Gb SFP
• Pass-through console, LAN management
• MMC
RTM SAS Expander, Integrated Disk Option
SB-RTM401
Data sheet
• ATCA Rear Transition Module
• 3Gb SAS expander
• One external molex SAS port (x4)
• 4 internal drives (maximum)
• Use SAS, SATA or SSD disks
PRELIMINARY INFORMATION
RTM SAS Expander, Integrated Disk Option
SB-RTM402
Data sheet
• ATCA Rear Transition Module
• 3Gb SAS expander
• Two external molex SAS port (x4)
• 2 internal drives (maximum)
• Use SAS, SATA or SSD disks
RTM PCI Express Expansion Module
SB-RTM403
Data sheet | Manual | Plug and Play RTMs
• ATCA Rear Transition Module
• x8 PCI express port
• x4 SAS-SATA port
• Pass-through console, LAN management
• MMC
Top
